Product Overview
Introduction
The ICR-3200 product family consists of advanced cellular routers designed to address diverse industrial requirements. With a variety of models offering a wide range of features and specifications, these routers ensure reliable connectivity for industrial applications.
The secure, password-protected web interface enables users to monitor detailed statistics, including activity logs, signal strength, and system logs. For guidance on first-time setup, refer to Initial Setup.
Key Features
- Networking: IPv4/IPv6 dual stack, DHCP, NAT, Dynamic DNS, VLAN, and QoS.
- VPN tunnels: OpenVPN, IPsec, WireGuard, GRE, L2TP, and PPTP.
- Reliability: Hardware watchdog, connection monitoring with automatic recovery, and Low Power Mode.
- Management and automation: Linux scripts, up to four configuration profiles, and remote updates of the configuration and firmware.
For the complete list of features, refer to the Router Features application guide.
Model Overview
The ICR-3200 product family includes several models, each tailored to specific regions and applications. The table below summarizes the available models and their features.
Tips
All ICR-3200 series models are housed in a metal enclosure.
| Order Code | Region | Cellular | Interfaces | SIM | Wi-Fi | GNSS | FN | EL |
|---|---|---|---|---|---|---|---|---|
| ICR-3201 | Global | โ | โ | โ | โ | โ | โ | โ |
| ICR-3201W | Global | โ | โ | โ | โ | โ | โ | โ |
| ICR-3211B | Global | LTE Cat-M1 | โ | โ | โ | โ | โ | โ |
| ICR-3231 | EMEA | LTE Cat.4 | โ | โ | โ | โ | โ | โ |
| ICR-3231W | EMEA | LTE Cat.4 | โ | โ | โ | โ | โ | โ |
| ICR-3231-EL | EMEA | LTE Cat.4 | โ | โ | โ | โ | โ | โ |
| ICR-3232 | ANZ | LTE Cat.4 | โ | โ | โ | โ | โ | โ |
| ICR-3232W | ANZ | LTE Cat.4 | โ | โ | โ | โ | โ | โ |
| ICR-3241 | NAM | LTE Cat.4 | โ | โ | โ | โ | โ | โ |
| ICR-3241W | NAM | LTE Cat.4 | โ | โ | โ | โ | โ | โ |
| ICR-3241-EL | NAM | LTE Cat.4 | โ | โ | โ | โ | โ | โ |
| ICR-3241-1ND | NAM | LTE Cat.4 | โ | โ | โ | โ | โ | โ |
| ICR-3241W-1ND | NAM | LTE Cat.4 | โ | โ | โ | โ | โ | โ |
โ = included ย ยทย โ = not available ย ยทย hover a heading or cell for details
Product Label
The router has a product label attached to its enclosure. The label provides information for identifying the product, its hardware configuration, and its regulatory status.

The label always includes the following information:
- Product model and serial number.
- Manufacturing date (year and month).
- Power supply requirements.
- MAC address.
- Default password.
- Separate barcodes encoding the serial number and the default password.
- A QR code encoding the serial number and MAC address and, for cellular routers, the IMEI. The QR code is primarily intended to identify and register the router in the WebAccess/DMP remote management platform, but its encoded information can also be used for other purposes.
- Manufacturer identification.
Depending on the product model and configuration, the label may also include the following information:
- Hardware revision.
- IMEI (for cellular routers only).
- Applicable regulatory marks and symbols.
The exact label content depends on the product model, hardware configuration, and applicable regulatory requirements.
The router may also carry additional labels that provide more detailed information about specific interfaces or display additional certification or regulatory markings.
Hardware Components
The ICR-3200 series supports a wide array of hardware features, as illustrated in the image below. Refer to the Model Overview section for model-specific details.

| # | Caption | Type | Description |
|---|---|---|---|
| 1 | Grounding Screw | M3 | Ensure proper grounding; see Power Supply. |
| 2 | SIM Slots | Mini SIM | Two SIM card slots; see SIM Card Slots. |
| 3 | Serial I/O | 10-pin terminal | RS-232, RS-485, and digital I/O interfaces; see Serial and I/O Port. |
| 4 | LEDs | โ | Status LED indicators; see LED Indicators. |
| 5 | Reset Button (RST) | โ | Button to reboot the router or restore the defaults; see RST Button Functions. |
| 6 | Power Supply (PWR) | 2-pin terminal | Connect the power supply; see Power Supply. |
| 7 | Ethernet Ports (ETH0, ETH1) | RJ45 | 100 Mbps Ethernet ports; see Ethernet Interfaces. |
| 8 | Diversity Antenna (DIV) | SMA | Connector for cellular diversity antenna; see Antenna Connections and Cellular Module Parameters. |
| 9 | Main Antenna (ANT) | SMA | Connector for the main cellular antenna; see Antenna Connections and Cellular Module Parameters. |

| # | Caption | Type | Description |
|---|---|---|---|
| 10 | Wi-Fi Antenna 1 (WiFi1) | RP-SMA | Connector for the first Wi-Fi antenna; see Antenna Connections and Wi-Fi Parameters. |
| 11 | GNSS Antenna | SMA | Connector for GNSS antenna; see Antenna Connections and GNSS Parameters. |
| 12 | Wi-Fi Antenna 2 (WiFi2) | RP-SMA | Second Wi-Fi antenna connector, also used for Bluetooth; see Bluetooth Support and Bluetooth Parameters. |
| 13 | Wall Mount Clips | โ | Standard wall-mounting clips; see Wall Mounting. |
| 14 | DIN Rail Clip | โ | Pre-installed DIN rail clip; see DIN Rail Mounting. |
Package Contents
Each router package includes the following:
| Item | Description | Image | Quantity |
|---|---|---|---|
| Router | ICR-3200 series router | ![]() | 1 |
| DIN Rail Mount | DIN rail clip for mounting on EN 60715 rails; pre-installed on the router | ![]() | 1 set |
| Wall Mount Wings | Wall mounting clips for surface installation; pre-installed on the router | ![]() | 2 pcs |
| Power Terminal Block | 2-pin terminal block for DC power supply connection; pre-installed on the router | ![]() | 1 |
| I/O Terminal Block | 10-pin terminal block for RS-232, RS-485, and digital I/O; pre-installed on the router | ![]() | 1 |
| Quick Start Guide | Printed quick start guide included in the package | ![]() | 1 |
Product Revisions
The revision history below summarizes key updates to the ICR-3200 product line. The revision number is printed on the packaging and product labels and is visible in the web interface: Status โ General โ System Information โ Product Revision.
| Rev.# | Description |
|---|---|
| 1.0 | Initial version (revision not printed on the labels). |
| 2.0 | New design of the mainboard (PCN-2022-01). |
| 2.1 | Improved surge pulse immunity on the mainboard (PCN-2023-06). |





