Product Overview
Introduction
The ICR-4400 (v4) product family consists of high-speed routers designed to address demanding industrial requirements โ from the ICR-4401 LAN router, through the ICR-4434 LTE Advanced Cat.12 router, up to the ICR-4461 5G NR router. All models share a gigabit Ethernet switch with an SFP cage, serial interfaces with CAN bus, and rich I/O.
The secure, password-protected web interface enables users to monitor detailed statistics, including activity logs, signal strength, and system logs. For guidance on first-time setup, refer to Initial Setup.
Key Features
- Networking: IPv4/IPv6 dual stack, DHCP, NAT, Dynamic DNS, VLAN, and QoS.
- VPN tunnels: OpenVPN, IPsec, WireGuard, GRE, L2TP, and PPTP.
- Reliability: Hardware watchdog, connection monitoring with automatic recovery, and Low Power Mode.
- Management and automation: Linux scripts, up to four configuration profiles, and remote updates of the configuration and firmware.
For the complete list of features, refer to the Router Features application guide.
Model Overview
The ICR-4400 product family includes several models, each tailored to specific regions and applications. The table below summarizes the available models and their features.
Tips
- Order code suffixes: S = PoE PSE, W / W1 / W3 = dual-band Wi-Fi module, -1ND = FirstNet certified.
- The W1 versions have no E8 certification and a limited operating temperature range of โ40 ยฐC to +60 ยฐC.
| Order Code | Region | Cellular | Interfaces | PoE | SIM | Wi-Fi | GNSS | FN |
|---|---|---|---|---|---|---|---|---|
| ICR-4401 | Global | โ | โ | โ | โ | โ | โ | โ |
| ICR-4401S | Global | โ | โ | โ | โ | โ | โ | โ |
| ICR-4401W | Global | โ | โ | โ | โ | โ | โ | โ |
| ICR-4401WS | Global | โ | โ | โ | โ | โ | โ | โ |
| ICR-4401W1 | Global | โ | โ | โ | โ | โ | โ | โ |
| ICR-4401W1S | Global | โ | โ | โ | โ | โ | โ | โ |
| ICR-4434 | Global | LTE Cat.12 | โ | โ | โ | โ | โ | โ |
| ICR-4434S | Global | LTE Cat.12 | โ | โ | โ | โ | โ | โ |
| ICR-4434W | Global | LTE Cat.12 | โ | โ | โ | โ | โ | โ |
| ICR-4434WS | Global | LTE Cat.12 | โ | โ | โ | โ | โ | โ |
| ICR-4434W1 | Global | LTE Cat.12 | โ | โ | โ | โ | โ | โ |
| ICR-4434W1S | Global | LTE Cat.12 | โ | โ | โ | โ | โ | โ |
| ICR-4461 | EMEA-NAM | 5G NR | โ | โ | โ | โ | โ | โ |
| ICR-4461S | EMEA-NAM | 5G NR | โ | โ | โ | โ | โ | โ |
| ICR-4461W3 | EMEA-NAM | 5G NR | โ | โ | โ | โ | โ | โ |
| ICR-4461W3S | EMEA-NAM | 5G NR | โ | โ | โ | โ | โ | โ |
| ICR-4461-1ND | EMEA-NAM | 5G NR | โ | โ | โ | โ | โ | โ |
| ICR-4461S-1ND | EMEA-NAM | 5G NR | โ | โ | โ | โ | โ | โ |
| ICR-4461W3-1ND | EMEA-NAM | 5G NR | โ | โ | โ | โ | โ | โ |
| ICR-4461W3S-1ND | EMEA-NAM | 5G NR | โ | โ | โ | โ | โ | โ |
โ = included ย ยทย โ = not available ย ยทย hover a heading or cell for details
Product Label
The router has a product label attached to its enclosure. The label provides information for identifying the product, its hardware configuration, and its regulatory status.

The label always includes the following information:
- Product model and serial number.
- Manufacturing date (year and month).
- Power supply requirements.
- MAC address.
- Default password.
- Separate barcodes encoding the serial number and the default password.
- A QR code encoding the serial number and MAC address and, for cellular routers, the IMEI. The QR code is primarily intended to identify and register the router in the WebAccess/DMP remote management platform, but its encoded information can also be used for other purposes.
- Manufacturer identification.
Depending on the product model and configuration, the label may also include the following information:
- Hardware revision.
- IMEI (for cellular routers only).
- Applicable regulatory marks and symbols.
The exact label content depends on the product model, hardware configuration, and applicable regulatory requirements.
The router may also carry additional labels that provide more detailed information about specific interfaces or display additional certification or regulatory markings.
Hardware Components
The v4 series supports a wide array of hardware features, as illustrated in the image below. Refer to the Model Overview section for model-specific details.

| # | Caption | Type | Description |
|---|---|---|---|
| 1 | LEDs | โ | Status LED indicators; see LED Indicators. |
| 2 | RST | โ | Button to reboot the router or restore the defaults; see RST Button Functions. |
| 3 | PWR | 2-pin terminal | Power supply socket; see Power Supply. |
| 4 | ETH2 | SFP cage | SFP cage socket; see SFP Cage. |
| 5 | ETH1 | RJ45 | 1 Gb Ethernet for the second LAN; see Ethernet Interfaces. |
| 6 | ETH0 | RJ45 | 1 Gb Ethernet switched connection (with four ports) for the first LAN; see Ethernet Interfaces. |
| 7 | USB | USB-A | USB 2.0 host port; see USB Port. |
| 8 | SERIAL & I/O | 14-pin terminal | RS-232, RS-485, CAN bus, digital input, and digital output interfaces; see Serial and I/O Port and I/O Parameters. |
| 9 | ANT0, ANT1, ANT2, ANT3 | SMA female | Cellular module antenna connectors (cellular models only); on the ICR-4461W3xx, ANT1 and ANT3 are shared with GNSS. See Antenna Connections, Cellular Module Parameters, and GNSS Parameters. |
| 10 | WIFI1 | RP-SMA female | Connectors for the Wi-Fi antennas (Wi-Fi models); on the ICR-4461W3xx, the right-hand Wi-Fi connector can be used for a Bluetooth antenna. See Antenna Connections, Wi-Fi Parameters, and Bluetooth Parameters. |

| # | Caption | Type | Description |
|---|---|---|---|
| 11 | Grounding Screw | M3 | Ensure proper grounding; see Power Supply. |
| 12 | SIM Slots, microSD Slot | Mini SIM, microSD | Two Mini SIM card slots (cellular models only) and a microSD card slot; see SIM Card Slots, Cellular Module Parameters, and MicroSD Card. |
| 13 | Wall Clips | โ | Wall mounting clips, included as standard accessories; see Wall Mounting. |
Package Contents
Each router package includes the following:
| Item | Description | Image | Quantity |
|---|---|---|---|
| Router | ICR-4400 series router | ![]() | 1 |
| Wall Mount Clips | Wall mounting clips; pre-installed on the router | ![]() | 2 pcs |
| Power Terminal Block | 2-pin terminal block for the power supply; pre-installed on the router | ![]() | 1 |
| Serial & I/O Terminal Block | 14-pin terminal block for RS-232, RS-485, CAN bus, and I/O; pre-installed on the router | ![]() | 1 |
| Quick Start Guide | Printed quick start guide included in the package | ![]() | 1 |
Product Revisions
The revision history below summarizes key updates to the ICR-4400 product line. Note that some revisions may not be available for certain order codes. The revision number is printed on the packaging and product labels and is visible in the web interface: Status โ General โ System Information โ Product Revision (the default revision 1.0 may not be shown there).
| Rev.# | Description |
|---|---|
| 1.0 | Initial version (revision not printed on the labels). |
| 2.0 | New design of the mainboard and PoE board (PCN-2023-03). |




