Technical Parameters
Basic Parameters
| Parameter | Condition | Value |
|---|---|---|
| Temperature Range | Operating Storage | -40 °C to +75 °C (-40 °F to +167 °F) -40 °C to +85 °C (-40 °F to +185 °F) |
| Humidity | Operating Storage | 5 to 95 % relative humidity, non-condensing 5 to 95 % relative humidity, non-condensing |
| Altitude | Operating | 2000 m / 70 kPa |
| Degree of Protection | IP30 | |
| Supply Voltage | 9 – 48 V DC | |
| Battery for RTC | CR1225 | |
| Dimensions (without clips) | 130 × 90 × 43 mm (5.12" × 3.54" × 1.39") | |
| DIN Rail Clip | DIN 35 mm, EN 60715 | |
Device Weight
| Model | Non-Wi-Fi | Wi-Fi |
|---|---|---|
| ICR-4133 | 500 g (1.10 lbs) | 510 g (1.12 lbs) |
| ICR-4233 | 505 g (1.11 lbs) | 515 g (1.14 lbs) |
| ICR-4161 | 470 g (1.04 lbs) | 480 g (1.06 lbs) |
| ICR-4261 | 490 g (1.08 lbs) | 500 g (1.10 lbs) |
| ICR-4171 | 510 g (1.12 lbs) | 525 g (1.16 lbs) |
| ICR-4271 | 515 g (1.14 lbs) | 530 g (1.17 lbs) |
| ICR-4172 | 510 g (1.12 lbs) | 525 g (1.16 lbs) |
| ICR-4272 | 515 g (1.14 lbs) | 530 g (1.17 lbs) |
Consumption
| Model | Idle [W]¹ | Average [W] | Maximum [W] | LPM Mode [mW] |
|---|---|---|---|---|
| ICR-4133 | 4.2 / 4.3 | 5.9 / 6.8 | 11.6 / 12.2 | 10 |
| ICR-4233 | 4.2 / 4.3 | 5.9 / 6.8 | 11.6 / 12.2 | 15 |
| ICR-4161 | 4.6 / 5.5 | 4.9 / 6.8 | 10.5 / 13.3 | 10 |
| ICR-4261 | 4.6 / 5.5 | 4.9 / 6.8 | 10.5 / 13.3 | 15 |
| ICR-4171 | 3.5 / 4.6 | 4.2 / 6.3 | 9.6 / 13.5 | 10 |
| ICR-4271 | 3.5 / 4.6 | 4.2 / 6.3 | 9.6 / 13.5 | 15 |
| ICR-4172 | 3.4 / 4.6 | 4.4 / 6.1 | 8.9 / 12.1 | 10 |
| ICR-4272 | 3.5 / 4.5 | 4.1 / 5.2 | 9.4 / 13.0 | 14 |
¹ Values shown as non-Wi-Fi / Wi-Fi.
Standards and Regulations
The routers comply with the following standards and regulations:
ICR-4133 and ICR-4233
| Parameter | Description |
|---|---|
| Radio | ETSI EN 301 908-1, ETSI EN 301 908-2, ETSI EN 301 908-13, ETSI EN 303 413, ETSI EN 300 328, ETSI EN 301 893, ETSI EN 303 687 |
| EMC | ETSI EN 301 489-1, ETSI EN 301 489-17, ETSI EN 301 489-19, ETSI EN 301 489-52, EN 55032, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-6-2, EN 61000-6-3 |
| Safety | EN IEC 62368-1, EN IEC 62311, IEEE 802.3 |
| Mechanical | EN 60529, EN 60068-2-27, EN 60068-2-64 |
| Climatic | EN 60068-2-2, EN 60068-2-1, EN 60068-2-14, EN 60068-2-78 |
| Transportation | E-Mark (E8), homologation number: 10R – 06 14947 |
| Cybersecurity | EN 18031-1 |
| National | CE, UKCA compliant |
| Environmental | REACH, RoHS3 and WEEE compliant |
ICR-4161 and ICR-4261
| Parameter | Description |
|---|---|
| Radio | ETSI EN 301 908-1, ETSI EN 301 908-2, ETSI EN 301 908-13, ETSI EN 301 908-25, ETSI EN 303 413, ETSI EN 300 328, ETSI EN 301 893, ETSI EN 303 687 |
| EMC | ETSI EN 301 489-1, ETSI EN 301 489-17, ETSI EN 301 489-19, ETSI EN 301 489-52, EN 55032, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-6-2, EN 61000-6-3, FCC part 15.B, FCC part 15C, FCC part 15E |
| Safety | EN IEC 62368-1, EN IEC 62311, IEEE 802.3 |
| Mechanical | EN 60529, EN 60068-2-27, EN 60068-2-64 |
| Climatic | EN 60068-2-2, EN 60068-2-1, EN 60068-2-14, EN 60068-2-78 |
| Transportation | E-Mark (E8), homologation number: 10R – 06 14947 |
| Cybersecurity | EN 18031-1 |
| National | CE, UKCA compliant |
| Environmental | REACH, RoHS3 and WEEE compliant |
ICR-4171, ICR-4172, ICR-4271, and ICR-4272
| Parameter | Description |
|---|---|
| Radio | ETSI EN 301 908-1, ETSI EN 301 908-2, ETSI EN 301 908-13, ETSI EN 301 908-25, ETSI EN 303 413, ETSI EN 300 328, ETSI EN 301 893, ETSI EN 303 687, FCC part 22H, FCC part 24E, FCC part 27, FCC part 90, FCC part 96, PTCRB |
| EMC | ETSI EN 301 489-1, ETSI EN 301 489-17, ETSI EN 301 489-19, ETSI EN 301 489-52, EN 55032, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-6-2, EN 61000-6-3, FCC part 15.B, FCC part 15C, FCC part 15E |
| Safety | EN IEC 62368-1, EN IEC 62311, IEEE 802.3 |
| Carrier Approvals | AT&T, T-Mobile¹, Verizon¹ |
| Mechanical | EN 60529, EN 60068-2-27, EN 60068-2-64 |
| Climatic | EN 60068-2-2, EN 60068-2-1, EN 60068-2-14, EN 60068-2-78² |
| Transportation | E-Mark (E8), homologation number: 10R – 06 14947 |
| Cybersecurity | EN 18031-1 |
| National | CE, UKCA, FCC compliant |
| Environmental | REACH, RoHS3 and WEEE compliant |
¹ Certification is issued for a specific project only.
² ICR-4172 and ICR-4272 additionally comply with NEMA TS2.
Type Tests and Environmental Specifications
Routers undergo the following tests to ensure durability and reliability:
| Phenomena | Test | Description | Test levels |
|---|---|---|---|
| ESD | EN 61000-4-2 | Enclosure contact | ± 6 kV (crit. A) |
| RF field AM modulated | EN 61000-4-3 | Enclosure | 20 V/m (crit. A) (80 – 1000 MHz) 10 V/m (crit. A) (1 – 6 GHz) |
| Fast transient | EN 61000-4-4 | Signal ports Power ports Ethernet ports | ± 1 kV (crit. A) ± 2 kV (crit. A) ± 1 kV (crit. A) |
| Surge | EN 61000-4-5 | Ethernet ports Power ports | ± 1 kV (crit. A), shielded cab. ± 1 kV (crit. A) |
| RF conducted | EN 61000-4-6 | All ports | 10 V/m (crit. A) (0.15 – 80 MHz) |
| Radiated emission | EN 55032 | Enclosure | Class B |
| Conducted emission | EN 55032 | Signal ports Power ports Ethernet ports | Class B Class B Class B |
| Dry heat | EN 60068-2-2 | Storage +85 °C (+185 °F) Operation +75 °C (+167 °F) | |
| Cold | EN 60068-2-1 | Storage -40 °C (-40 °F) Operation -40 °C (-40 °F) | |
| Damp heat | EN 60068-2-78 | 95 % rel. humidity (+40 °C / +104 °F) | |
| Dry heat, cyclic | EN 60068-2-30 | +55 °C (+131 °F) / +25 °C (+77 °F), 95 % rel. humidity, 12 h – 12 h | |
| Thermal shock / temp. variation | EN 60068-2-14 | -40 °C (-40 °F) / +75 °C (+167 °F), 3 h/3 h, 2 cycles, 3 K/min | |
| Degrees of protection | EN 60529 | IP30 | |
| Vibration | EN 60068-2-64 | Spectrum A.3 cat 1, breakpoints A.6 cat 1 | |
| Shock | EN 60068-2-27 | 50 m/s², 11 ms, half sine, 10 in each direction | |
| Low Temperature¹ | NEMA TS2, chap. 2.1.5.1 | Storage -45 °C (-49 °F) | |
| High Temperature¹ | NEMA TS2, chap. 2.1.5.1 | Storage +85 °C (+185 °F) | |
| Low Temperature¹ | NEMA TS2, chap. 2.2.7.3/2.2.7.4 | Operation -34 °C (-30 °F) | |
| High Temperature¹ | NEMA TS2, chap. 2.2.7.5/2.2.7.6 | Operation +74 °C (+165 °F) | |
¹ Applies to ICR-4272 only.
Cellular Module Parameters
ICR-4133 and ICR-4233
| Parameter | Description |
|---|---|
| Antenna | Connector type: SMA (ANT + DIV) Input impedance: 50 Ω VSWR: ≤ 2 Input power: > 28 dBm Antenna gain: < 3.6 dBi Antenna isolation: > 25 dB Antenna correlation coefficient: < 0.5 |
| LTE parameters | Standard: 3GPP R12 Supported modulations: 64QAM, 16QAM, QPSK (DL/UL) Supported FDD bands: B1 (2100), B3 (1800+), B5 (850), B7 (2600), B8 (900 GSM), B20 (800 DD), B28 (700 APT), B32 (1500 L-band) Supported TDD bands: B38 (TD 2600), B40 (TD 2300), B41 (TD 2500+) Bandwidth: 1.4 – 20 MHz Peak bit rates: 300 Mbps (DL) / 50 Mbps (UL) @ 2×2 MIMO Power class: Class 3 (23 dBm ± 2 dBm) |
| WCDMA parameters | Standard: 3GPP R9, DC-HSDPA, HSPA+, HSDPA, HSUPA, WCDMA Supported modulations: 64QAM, 16QAM, QPSK Supported bands: B1 (2100 MHz), B3 (1800 MHz), B5 (850 MHz), B8 (900 MHz) Peak bit rates: 42 Mbps (DL) / 5.76 Mbps (UL) Power class: Class 3 (23.5 dBm ± 2 dBm) |
ICR-4161 and ICR-4261
| Parameter | Description |
|---|---|
| Antenna | Connector type: SMA (4 pcs) Input impedance: 50 Ω VSWR: ≤ 3 Efficiency: > 30 % |
| 5G NR parameters | Standard: 3GPP Release 16 UL 2×2 MIMO: n38, n41, n48, n77, n78, n79 DL 4×4 MIMO (SA): n1, n2, n3, n7, n25, n30, n38, n40, n41, n48, n66, n70, n77, n78, n79 DL 4×4 MIMO (NSA): n1, n2, n3, n7, n25, n30, n66, n38, n40, n41, n48, n70, n77, n78, n79 Supported 5G NR SA & NSA bands: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 NSA TDD: max. 3.4 Gbps (DL), max. 550 Mbps (UL) SA TDD: max. 2.4 Gbps (DL), max. 900 Mbps (UL) Max. output power: 23 dBm ± 2 dB Class 3 (standard bands); 26 dBm +2/−3 dB Class 2 (HPUE bands: n38/n40/n41/n77/n78/n79) |
| LTE parameters | Standard: 3GPP Release 16 (DL Cat 19 / UL Cat 18) Supported FDD bands: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 Supported TDD bands: B34, B38, B39, B40, B41, B42, B43, B46, B48 Bit rates: max. 1.6 Gbps (DL), max. 200 Mbps (UL) Max. output power: 23 dBm ± 2 dB Class 3 (standard bands); 26 dBm ± 2 dB Class 2 (HPUE: B38/B41/B42/B43) |
| UMTS parameters | Standard: 3GPP Release 9, DC-HSDPA, HSPA+, HSDPA, HSUPA, WCDMA Supported bands: B19, B5, B8, B4, B2, B1 DC-HSDPA: max. 42 Mbps (DL) HSUPA: max. 5.76 Mbps (UL) WCDMA: 384 kbps (DL) / 384 kbps (UL) Max. output power: 24 dBm +1/−3 dB (Class 3) |
Antenna Mapping
| Connector | Description |
|---|---|
| ANT0 | 5G NR Tx: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n30, n38, n40, n41, n66, n71 5G NR Rx: n1–n3, n5, n7, n8, n12–n14, n18, n20, n25, n26, n28–n30, n38, n40, n41, n48, n66, n71, n75(SDL), n76(SDL), n77, n78, n79 LTE Tx: B1–B5, B7, B8, B12–B14, B17–B20, B25, B26, B28, B30, B34, B38–B41, B66, B71 LTE Rx: B1–B5, B7, B8, B12–B14, B17–B20, B25, B26, B28, B29(SDL), B30, B32(SDL), B34, B38–B43, B46(SDL), B48, B66, B71 WCDMA Tx/Rx: B1, B2, B4, B5, B6, B8, B19 |
| ANT1 | 5G NR Tx: n48, n77, n78, n79 5G NR Rx: n1–n3, n7, n25, n30, n38, n40, n41, n48, n66, n75(SDL), n76(SDL), n77, n78, n79 LTE Rx: B1–B4, B7, B25, B30, B32(SDL), B34, B38–B43, B48, B66 GNSS: GPS L1, Galileo E1, BeiDou B1, GLONASS G1 |
| ANT2 | 5G NR Tx: n38, n41 5G NR Rx: n1–n3, n5, n7, n8, n12–n14, n18, n20, n25, n26, n28–n30, n38, n40, n41, n48, n66, n71, n75(SDL), n76(SDL), n77, n78, n79 LTE Rx: B1–B5, B7, B8, B12–B14, B17–B20, B25, B26, B28, B29(SDL), B30, B32(SDL), B34, B38–B43, B46(SDL), B48, B66, B71 WCDMA Rx: B1, B2, B4, B5, B6, B8, B19 |
| ANT3 | 5G NR Tx: n48, n77, n78, n79 5G NR Rx: n1–n3, n7, n25, n30, n38, n40, n41, n48, n66, n75(SDL), n76(SDL), n77, n78, n79 LTE Tx: B42, B43, B48 LTE Rx: B1–B4, B7, B25, B30, B32(SDL), B34, B38–B43, B48, B66 |
| GNSS | GPS L1, Galileo E1, BeiDou B1, GLONASS G1 |
ICR-4171 and ICR-4271
| Parameter | Description |
|---|---|
| Antenna | Connector type: SMA (4 pcs), input impedance: 50 Ω |
| 5G NR parameters | 5G sub-6 FDD and TDD, SA and NSA operations UL 2×2 MIMO: n38, n41, n48, n77, n78, n79 DL 4×4 MIMO (SA): n1, n2, n3, n7, n25, n30, n38, n40, n41, n48, n66, n70, n77, n78, n79 DL 4×4 MIMO (NSA): n1, n2, n3, n7, n25, n30, n66, n38, n40, n41, n48, n70, n77, n78, n79 Supported 5G NR SA & NSA bands: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 NSA TDD: max. 3.4 Gbps (DL), max. 550 Mbps (UL) SA TDD: max. 2.5 Gbps (DL), max. 900 Mbps (UL) Max. output power: 23 dBm ± 2 dB Class 3 (standard bands); 26 dBm +2/−3 dB Class 2 (HPUE: n38/n40/n41/n77/n78/n79) |
| LTE parameters | Standard: 3GPP Release 16 (DL Cat 19 / UL Cat 18) 4×4 MIMO DL for B1, B2, B3, B4, B7, B25, B30, B38, B40, B41, B42, B43, B48, B66 Supported FDD bands: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 Supported TDD bands: B34, B38, B39, B40, B41, B42, B43, B46, B48 Bit rates: max. 1.6 Gbps (DL), max. 200 Mbps (UL) Max. output power: 23 dBm ± 2 dB Class 3 (standard bands); 26 dBm ± 2 dB Class 2 (HPUE: B38/B41/B42/B43) |
| UMTS parameters | Standard: 3GPP Release 9, DC-HSDPA, HSPA+, HSDPA, HSUPA, WCDMA Supported bands: B19, B5, B8, B4, B2, B1 DC-HSDPA: max. 42 Mbps (DL) HSUPA: max. 5.76 Mbps (UL) WCDMA: 384 kbps (DL) / 384 kbps (UL) Max. output power: 24 dBm +1/−3 dB (Class 3) |
Antenna Mapping
| Connector | Description |
|---|---|
| ANT0 | 5G NR Tx: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n30, n38, n40, n41, n66, n71 5G NR Rx: n1–n3, n5, n7, n8, n12–n14, n18, n20, n25, n26, n28–n30, n38, n40, n41, n48, n66, n71, n75(SDL), n76(SDL), n77, n78, n79 LTE Tx: B1–B5, B7, B8, B12–B14, B17–B20, B25, B26, B28, B30, B34, B38–B41, B66, B71 LTE Rx: B1–B5, B7, B8, B12–B14, B17–B20, B25, B26, B28, B29(SDL), B30, B32(SDL), B34, B38–B43, B46(SDL), B48, B66, B71 WCDMA Tx/Rx: B1, B2, B4, B5, B6, B8, B19 |
| ANT1 | 5G NR Tx: n48, n77, n78, n79 5G NR Rx: n1–n3, n7, n25, n30, n38, n40, n41, n48, n66, n75(SDL), n76(SDL), n77, n78, n79 LTE Rx: B1–B4, B7, B25, B30, B32(SDL), B34, B38–B43, B48, B66 GNSS: GPS L1, Galileo E1, BeiDou B1, GLONASS G1 |
| ANT2 | 5G NR Tx: n38, n41 5G NR Rx: n1–n3, n5, n7, n8, n12–n14, n18, n20, n25, n26, n28–n30, n38, n40, n41, n48, n66, n71, n75(SDL), n76(SDL), n77, n78, n79 LTE Rx: B1–B5, B7, B8, B12–B14, B17–B20, B25, B26, B28, B29(SDL), B30, B32(SDL), B34, B38–B43, B46(SDL), B48, B66, B71 WCDMA Rx: B1, B2, B4, B5, B6, B8, B19 |
| ANT3 | 5G NR Tx: n48, n77, n78, n79 5G NR Rx: n1–n3, n7, n25, n30, n38, n40, n41, n48, n66, n75(SDL), n76(SDL), n77, n78, n79 LTE Tx: B42, B43, B48 LTE Rx: B1–B4, B7, B25, B30, B32(SDL), B34, B38–B43, B48, B66 |
| GNSS | GPS L1, Galileo E1, BeiDou B1, GLONASS G1 |
ICR-4172 and ICR-4272
| Parameter | Description |
|---|---|
| Antenna | Connector type: SMA (4 pcs), input impedance: 50 Ω 5G sub-6 FDD and TDD, SA and NSA operations 4G 7×CA up to 20 layers DL / 2×CA UL, 256-QAM DL/UL |
| 5G NR parameters | 5G sub-6 FDD and TDD, SA and NSA operations UL 2×2 MIMO: n38, n41, n48, n77, n78, n79 DL 4×4 MIMO (SA): n1, n2, n3, n7, n25, n30, n38, n40, n41, n48, n66, n70, n77, n78, n79 DL 4×4 MIMO (NSA): n1, n2, n3, n7, n25, n30, n66, n38, n40, n41, n48, n70, n77, n78, n79 Supported 5G NR SA & NSA bands: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 NSA TDD: max. 3.4 Gbps (DL), max. 550 Mbps (UL) SA TDD: max. 2.5 Gbps (DL), max. 900 Mbps (UL) Max. output power: 23 dBm Class 3 (standard NR bands); 26 dBm Class 2 (HPUE: n41); 29 dBm Class 1.5 (n41, n77, n78, n79) |
| LTE parameters | Standard: 3GPP Release 16 (Cat 20) 4×4 MIMO DL for B1, B2, B3, B4, B7, B25, B30, B38, B40, B41, B42, B43, B48, B66 Supported FDD bands: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71, B106¹ Supported TDD bands: B34, B38, B39, B40, B41, B42, B43, B46, B48 Bit rates: max. 2.0 Gbps (DL), max. 211 Mbps (UL) Max. output power: 23 dBm Class 3 (standard LTE bands); 26 dBm Class 2 (HPUE: B41) |
| UMTS parameters | Standard: 3GPP Release 9, DC-HSDPA, HSPA+, HSDPA, HSUPA, WCDMA Supported bands: B19, B5, B8, B4, B2, B1 DC-HSDPA: max. 42 Mbps (DL) HSUPA: max. 5.76 Mbps (UL) WCDMA: 384 kbps (DL) / 384 kbps (UL) Max. output power: 24 dBm +1/−3 dB (Class 3) |
¹ B106 (900 MHz) is disabled by default. To enable it, use the Band Select Router App.
Antenna Mapping
Tips
Antenna mapping is identical to ICR-4171 and ICR-4271 — see table above.
GNSS Parameters
ICR-4133 and ICR-4233
| Parameter | Description |
|---|---|
| GNSS Systems | GPS, Galileo, GLONASS, BeiDou, QZSS All systems can be used simultaneously in any combination. |
| Antenna | Connector type: SMA Input impedance: 50 Ω Frequency range: 1559 – 1609 MHz Polarization: RHCP or linear VSWR: < 2:1 Power mode: passive antenna only Passive antenna gain: > 0 dBi |
| Sensitivity | Cold start: 39 dB-Hz Acquisition: −145 dBm Tracking: −156 dBm |
| TTFF | Cold start: 40 s Warm start: 35 s Hot start: 3 s |
| Static Accuracy | Horizontal position: 3 m (nominal) |
ICR-4161 and ICR-4261
| Parameter | Description |
|---|---|
| GNSS Systems | GPS, Galileo, GLONASS, BeiDou, QZSS (BeiDou and QZSS are activated or deactivated together) |
| Antenna | Connector type: SMA Input impedance: 50 Ω Shared with cellular SMA connectors: ANT3 for L1 band, ANT1 for L5 band Frequency range: L1: 1559–1609 MHz, L5: 1166–1187 MHz Polarization: RHCP or linear VSWR: < 2 (typ.) Power mode: passive antenna only Passive antenna gain: > 0 dBi |
| Features | Protocol: NMEA 0183 Data update rate: 1 Hz |
| Frequency | GPS/Galileo/QZSS (L1): 1575.42 ± 1.023 MHz GPS/Galileo/QZSS (L5): 1176.45 ± 10.23 MHz Galileo (E1): 1575.42 ± 2.046 MHz GLONASS: 1597.5 – 1605.8 MHz BeiDou: 1561.098 ± 2.046 MHz |
| Sensitivity (autonomous) | Acquisition: −147 dBm Reacquisition: −160 dBm Tracking: −160 dBm |
| TTFF (autonomous) | Cold start: 27.93 s Warm start: 11.55 s Hot start: 1.09 s |
| Accuracy (CEP-50, autonomous) | 1.35 m (open sky) |
ICR-4171, ICR-4172, ICR-4271, and ICR-4272
| Parameter | Description |
|---|---|
| GNSS Systems | GPS, Galileo, GLONASS, BeiDou, QZSS GPS is permanently enabled. Most combinations are supported. Unsupported combinations: GPS + BeiDou; GPS + QZSS; GPS + BeiDou + QZSS; GPS + Galileo + QZSS; GPS + Galileo + BeiDou + QZSS; GPS + Galileo + GLONASS + QZSS |
| Antenna | Connector type: SMA Input impedance: 50 Ω Dedicated GNSS active antenna SMA connector for L1 band Frequency range (L1): 1559 – 1606 MHz Polarization: RHCP or linear VSWR: ≤ 2:1 Power mode: active or passive antenna Passive antenna gain: 1.5 dBi < gain < 3 dBi |
| Features | Protocol: NMEA 0183 Data update rate: 1 Hz |
| Frequency | GPS (L1): 2.046 MHz BW NB (centered on 1575.42 MHz) Galileo (E1): 4.092 MHz BW (centered on 1575.42 MHz) GLONASS: 8.3 MHz BW (1597.05 – 1606 MHz) BeiDou: 4.092 MHz BW (1559.05 – 1563.14 MHz) |
| Sensitivity (autonomous) | Acquisition: −148 dBm Cold start: −146 dBm Tracking: −161 dBm |
| TTFF (autonomous) | Cold start: 28 s Warm start: 27 s Hot start: 1 s |
| Accuracy (CEP-50, autonomous) | 2 m (open sky) |
Wi-Fi Parameters
Caution
The 5 GHz and 6 GHz Wi-Fi interfaces operate in frequency bands that may be restricted to indoor use only in certain EU member states (for example, 5150–5350 MHz in the 5 GHz band). Refer to the regulatory documentation for your router model for details.
| Parameter | Description |
|---|---|
| Short Description | Wi-Fi 6/6E, 2×2 MU-MIMO |
| Supported Standards | IEEE 802.11ax/ac/a/b/g/n (2T2R) DBDC (Dual-band, Dual-concurrent) |
| Antenna Connectors | 2×2 MU-MIMO RP-SMA |
| Access Point | Up to 15 clients |
| Data Rate | Up to 450 Mbps @ 2.4 GHz Up to 950 Mbps @ 5 GHz Up to 950 Mbps @ 6 GHz 802.11b: up to 11 Mbps 802.11a/g: up to 54 Mbps 802.11n: MCS0–15 802.11ac: MCS0–9 802.11ax: MCS0–13 |
| Frequency Ranges | 2.412 – 2.484 GHz 5.150 – 5.850 GHz 5.925 – 7.125 GHz |
| Spectrum Widths | 20/40 MHz @ 2.4 GHz 20/40/80/160 MHz @ 5/6 GHz |
| Modulation | 802.11b: DSSS (DBPSK, DQPSK, CCK) 802.11g/n/a: OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.11ac: OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM) 802.11ax: OFDMA (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM) |
| Type of Device | Access point (AP), Station (STA), Multi-role (AP & STA) |
| Security — Standards | WPA, WPA2, WPA3, 802.1X |
| Security — Encryption | WEP, TKIP, AES |
| TX Power (2 chains)¹ | Max. 20 dBm @ 2.4 GHz Max. 18 dBm @ 5 GHz Max. 16 dBm @ 6 GHz |
¹ The maximum transmit power is determined by the Country setting in the router's web interface.
Bluetooth Parameters
| Parameter | Description |
|---|---|
| Bluetooth Standards | V5.2, V5.1, V5.0, V4.2, V4.1, V4.0 LE, V3.0, V2.1+EDR |
| Antenna | Shared with right RP-SMA connector |
| Frequency Range | 2.412 – 2.484 GHz |
| Data Rates Supported | 1 Mbps, 2 Mbps, up to 3 Mbps |
| Modulation | Header: GFSK Payload 2M: π/4-DQPSK Payload 3M: 8-DPSK |
| Receive Sensitivity | < 0.1 % BR, BER at −70 dBm |
| Output Power | ≤ +14 dBm |
I/O Parameters
Tips
This section applies to ICR-4233, ICR-4261, ICR-4271, and ICR-4272. Models ICR-4133, ICR-4161, ICR-4171, and ICR-4172 do not include I/O or serial interfaces.
The digital input status is available in the router's web interface (General Status page) and via the status ports and io get commands — refer to the Command Line Interface application note.
Characteristics of digital inputs:
| Logical¹ | Voltage | Current | Status² |
|---|---|---|---|
| 1 | 3 V | 0.5 mA | Off |
| 0 | 5 V | 0.8 mA | On |
| 0 | 12 V | 1.6 mA | On |
| 0 | 48 V | 3.4 mA | On |
¹ The digital status returned by the io get shell command.
² The digital status returned by the status ports shell command and displayed on the General Status page.
The maximum digital output load is 500 mA at 48 V.
Serial Interfaces
Tips
The RS232 and RS485 interfaces can be configured in Expansion Port 1 and Expansion Port 2.
| Parameter | Description |
|---|---|
| Baudrate | 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bps |
| Data Bits | 5, 6, 7, 8 |
| Parity | None, even, odd |
| Stop Bits | 1, 2 |
| Flow Control | None, hardware |
System Configuration
| Parameter | Description |
|---|---|
| CPU Architecture | 64-bit Quad-Core ARM Cortex-A53 |
| CPU Frequency | 1.6 GHz |
| CPU Power | 2.3 DMIPS/MHz |
| Flash Memory | 8 GB eMMC: • 2.18 GB for Router Apps • 474 MB for customer data • 231 MB for system extensions • Remaining space reserved for system |
| RAM | 1 GB |
| Watchdog | HW watchdog |
| RTC | Battery backup RTC |
| TPM | Trusted Platform Module (TPM) 2.0 |
| SIM Slots | 2× SIM (Mini SIM 2FF) 1× Chip SIM (MFF2)¹ |
¹ Not assembled by default; available for dedicated customer orders only.